Diameter 52 mm1/8 thread

1/8" male connection.2" diameter (50.8 mm)

Diameter Ø 52 mm Pressure: 0 - 80 Lbs Fits: Ford 2n, 8N, 9N. NAA, Jubilee OEM: ​FAD9273A

6 FT copper 1/8" line (1.80 mtr x 3.17 mm)Kit includes: (2) 5/16 - 24 UNF nut, (2) compression sleeves, (1) 1/8 - 27 NPTF female to 5/16" - 24 UNF male adapter Note: Depending on application customer may be required to purchase other fittings

Old style temperature gauge. 52 mm outer diameter. 5/8" thread. , Will fit most thermostat housings or engine blocks 30 to 100 degree celcius.Fits also Ferguson TEA, TED, TEFFord 2N, 8N, 9N.

2" diam. Range: 20-0-20Universel amm meter fits every dynamo with a maximum output of 20 Amp.Allis Chalmers - Fits: B, C, CA, G, IB, RC, WC, WD, WD45 (Diesel), WD45, WF; Replaces: 208302, 70208302 Avery - Fits: A, BF, BG, R, V Case - Fits: 420C (Craw...

8N5162

Covers the 6 Volt battery, without mounting clamps

Mounting bracket for rear light cable. 6 clamps required per tractor

New 6 Volt startermotor complete with drive,

Fits the fors tractors made between 1939 and 52

8N-11001

6 Volt starter relais, with saddle mount bracket. Fits tractors made between 1948 to 1952

Starter solenoid switch 6 Volt. for the Ford 8N 1948-52 with FOMOCO script

9N11450A

Restoration quality startermotor switch, Fits 9N # 12500 and up and model 2N. OEM: 9N11450B

OEM: 8N11500

8N11113

Engine wiring loom for Ford 8N, no light cables

0-1 switch, but will work also as a universal 0-1 switchMounting hole 19mm.

Universal lights switch, pull type, 0-1-2. Complete with fuse. has terminals for Hi-lo beam, dash and tail lights

Champion H10C Sparkplug, fits Ford 8n etc.Gasoline and TVOFord V8. 60 HP engine

Resistor block mounted under the dash. gives the right voltage to the front mounted coil. OEM: A8NN12250B ,

Ford 8N, 2N & 9NFord V8 1932-48Resistor mounted under the dash. gives the right voltage to the front mounted coil. OEM: A8NN12250B

Ignition resistor in modern design. This resistor replaces the FR2017 in appearance but has the same function. This resistor must always be placed in a 6 volt system between the ignition switch and the 6 volt ignition coil. 0.85 OHMS Ford 2...

Universal set with 90 degree steel sparkplug connectors ( not as shown in the photo)

6 Volt distributor coil for front mount distributors.. Please pay attention that the dash mounted resistor is wired and in good working order !. OEM: 9N12024

12 Volt distributor coil for front mount distributors.Note: Other than the factory dash mount resistor, no extra (external) resistor is needed. This coil is internally resistedOld resister needs to be removed or cross wired

9N12137

Distributor cap for front mount distributors. 1939 - 1950