For easy removal of the outer rear axle sleeveFord 1911-27

Removes the rear wheel the easy way. Threads on rear hub cap threads and a bolt threads down against the end of the axle shaft and keeps outward pressure on the hub while you tap the end of this tool.

Threads on rear hub cap threads and a bolt threads down against the end of the axle shaft and keeps outward pressure on the hub while you tap the end of this tool.TT-Truck 1919-27

This tool threads into the spark plug hole and measures specific degrees past top dead center

This sleeve fits over the end of the cam and aligns the timing cover for installation

Slips over the end of the camshaft & allows you to center the timing cover, ensuring correct timing of the spark plugs. Loosen bolts, attach tool & bolts can then be accurately re-tightened

This kit gives you everything you need except a drill bit for repairing head and manifold styd threads in the block

Supplied with the car when newWrench will fit: Hub Caps, Front Spindle Nuts, Front Outer Wheel Bearing, and Spark PlugFord 1909-27T-1349-X

Use this tool to set the commutator rod that runs to the timer from the spark rod on the steering column. The large hole in one end slips over the head of the generator mount bolt, and the other end will tell you where your commutator rod needs to be

Size: 43 x 56 cm.  (17 x 22 inch)

T-Ford workshop manual,

A comprehensive guide for the repair and restoration of the front and rear axles. Packed with information to make your restoration easier from start to finish. Includes many pictures and step-by-step instructions31 pages

This complete guide to the repair and restoration of the Model T electrical system covers all major components from coils to starters to magnetos. Offers step-by-step instructions on restoring your electrical system, complete with photos and detailed...

Suction gun for rear axle oil, for removing and filling 600W into rear end

Used to twist the drive shaft when installing the rear end under the T

Key sizes: 1/4", 5/16", 3/8" 7/16", 1/2", 9/16" 5/8" 11/16".High quality set

Contrast fluid, To find hair cracks in material. like crankshafts en drums ( like on the Ford model-T transmission)Spay can 400 ml.

Spraycan 400 ml.

This custom owner plate as areas to engrave your personal data, but it also has an area to engrave your vehicle make information

Band changing tool, pulls band around drum for easy installation without removing the complete hogshead. Will only work if you have demountable ears on the bands  

This handy tool is great for checking to see if you have spark. With the car running, just hold against the spark plug to see if you are getting spark to the plug. Not usable when a plastic or rubber cap has being placed on top of the sparkplug&nb...

This hat is fully adjustable

Attaches to water inlet holes and two pan bolt holes. Lets you attach the Model A or Model T motor to a standard engine stand Round Shank is Ø 60 mm and not drilled yet

Accessory bolt/nut set for mounting the license plate to the USA style slotted mounting bracket