Main jet control rod, Ford 1917-25All models with a steel firewallT-4129-A

When bolting the carb to the intake, getting to the bolt heads can be a real pain! These are long headed bolts that stick out far enough that you can easily get a wrench on the hex T-Ford 1909-1927 running with a generator. Not for Vaporisor mode...

job of filtering. Much heavier duty than our T-6205 filter. Has a spring loaded insert that goes between the carb throat and filter housing so it holds the filter tight between the carb and the hogs head. Works on Holley NH, Kingston and any carb wit...

Holley G carburateur Ford 1914-21

Kingston L Ford 1917-21

Kingston L4 Ford 1921-26

This new and improved NH carburetor gasket set now included a neoprene gas feed line gasket (for a better seal than offered by original felt seal)  T-Ford 1920-1926 ​OEM: 6200NH

Holley "Vaporizer" Ford 1926-27

Kingston Varporizer carburateur gasket set ​T-Ford 1926-27 OEM: T6150-VAP

KingstonFord 1912-26

Holley NH and G Ford 1920-27 ​OEM: T-6218

Holley NH Ford 1914-23 OEM: 6206B Distance between the eyelets: 47.6 mm

Holley NH Ford 1923-26 OEM: 6206B Distance between te eyelets: 35 mm

Brass choke or throttle plate T-Ford 1920-27 OEM: T-6209

T-Ford 1926-27 OEM: T-6256

Holley NHFord 1919-27

Kingston VaporizerFord 1926-27

Kingston L Carburetor float E10 Ethanol resistant Float dimensions: 63.5 x 44.4 mm Hoogte: 16 mm ​OEM: T-6201-L2  

Made of modern material resistant to alcohol. Hardware included, use old hinge. 2-7/8" O.D., 2" I.D., 1/2" High. OEM: T-6201-G

T-Ford 1920-27T-6201

Steel made bowl for the NH and Holly Vaporizer. carburetor T-Ford 1923-1927 OEM: T-6202-C

For the Holley NH carburetor, Threads into the top of the carburetor and tightens on the adjusting needle T-Ford 1920-25 ​OEM: T-6208

Adjustable spay needle for the Holley NH carburetors T-Ford 1920-25 OEM: T-6213 ​ 

Shaft lengt 28.5 mmFord 1923-26T-6206-C

Completely new Holley carburetoFord 1909-25

Used on the Kingston L4 carburetor. This small round cork goes inside the air valve stop. When the air valve bounces up in the carb, it bumps against this corkFord 1921-27T-6171-C

Shaft lenght 38 mmFord 1914-23T-6206-A