Product description
Tank Cure Coating is a solvent-free 2-component epoxy coating with excellent fuel and oil resistance. Can be used on the inside of metal tanks. To guarantee a good result, pre-treat the tank with Tank Cure Cleaner and Tank Cure Deruster. Mix both components thoroughly and fill the tank with this. Then close the filling opening. Now slowly rotate the tank in all directions so that the coating reaches all points on the inside. Do this for 15 - 20 minutes and then drain the excess liquid through the filling opening. After curing for at least 7 days at room temperature, the tank can be put back into use.
A 450 gram set is suitable for treating a fuel tank of up to 15 to 20 liters. Quantities depend on the type of tank. A tank with one or more partitions generally consumes more resin than a tank without a partition.
Packaging: 450 gr Safety
information: Base H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H341 Suspected of causing genetic defects. H360F May damage fertility. H411 Toxic to aquatic life with long lasting effects. Hardener H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H361d Suspected of damaging the unborn child. H412 Harmful to aquatic life with long lasting effects.
