This is a non returnable product - READ INSTRUCTIONS CAREFULLY. Designed for low amperage loads - 4 Amp maximum and 2 Amp minimum loadVoltage reducer with resistance wire mounted on a ceramic back plateMounts under dash or motor compartment.Caution: ...

Ford 1919-23

Ford 1919-21

Switch wire harness, from ignition switch to terminal block on firewall, original style. T-Ford 1919-27 OEM: T-5042

The wiring for the headlights and tail lights. The early 1919-25 harness takes care of the lighting on the left side of the car, and the T-5031 accomodates the right side. TT trucks use T-5041, but you will have to lengthen the tail light wire.

The wiring for the headlights and tail lights. T-Ford 1926-27 OEM: T-5041-E

This harness takes care of the wires that hook up to the timerT-Ford without a starter and with electric lightsOEM: T-50305 wire loom

This harness takes care of the wires that hook up to the timer. For cars with a starter up to 1925, you will use this harness. It also takes care of the right side lighting OEM: T-5031 7 wire loom

This harness takes care of the wires that hook up to the timer. T-Ford 1926-27 cars with the coil box mounted on the motorOEM: T-5031-B

Ford used this switch on the 1926-27 models. Mounts to the starter bendix cover and is activated with the outward movement of the pedal shaft ​OEM: T-3158

Excellent quality made to the original Ford blueprint with the exception of the finish.  The original was silver plated which tarnished causing decreased performance.  These have a vacuum metalized aluminum finish with 92-98% reflectability...

With FORD inscription in the glassT-Ford 1915-27T-6576-HX

Original rope type. Glue onto the reflector with the ends at the bottom with a slight gap to act as a water drainT-65782 pc set

T-6586-X

T-Ford 1915-166575BR

T-Ford 1926-27 ​OEM: T-6575-N

This cable plug fits in to the rear of the headlights T-Ford 1915-27 ​OEM: T-6592

Magneto Headlight Bulb, double contact. This bulb is for use with magneto powered headlights only. NOTE: This is NOT for use with 6 or 12 volt batteries.

6 Volt 32/50 watt headlightbulb for the Ford model T

15 mm

Switch plate with ignition and light switch2 keys includedT-Ford 1919-25

1926-27 switch plate, Chrome finishOn the right side of this plate you need to install an Ampere meterT-5012-D

Ford started using these adapter rings on the model T dashboard in 1926 to use the smaller amp meter.This adpter ring can now be used for older models also.

2 x M10 connection cable19 mm dashboard mounting hole

Fits to the H7251 master switchØ 60 mm ODØ 20 mm ID

ACCESSORY STOPLIGHT, polished brass beautiful reproductionThe word "STOP" appears in a red lens when lit.

Exact reproduction of the original tail light. But now with 21/5W bulb fitting

Exact reproduction tail light for teh Ford. Now with a 21/5W bulb holderWith licence plate light

For a drum type tail light, this fits a Ford coupe or roadster from 1928 to July 1929. It is held by three bolts to the subframe of the body.