This is a non returnable product - READ INSTRUCTIONS CAREFULLY. Designed for low amperage loads - 4 Amp maximum and 2 Amp minimum loadVoltage reducer with resistance wire mounted on a ceramic back plateMounts under dash or motor compartment.Caution: ...
Ford 1919-23
Ford 1919-21
Switch wire harness, from ignition switch to terminal block on firewall, original style. T-Ford 1919-27 OEM: T-5042
The wiring for the headlights and tail lights. The early 1919-25 harness takes care of the lighting on the left side of the car, and the T-5031 accomodates the right side. TT trucks use T-5041, but you will have to lengthen the tail light wire.
The wiring for the headlights and tail lights. T-Ford 1926-27 OEM: T-5041-E
This harness takes care of the wires that hook up to the timerT-Ford without a starter and with electric lightsOEM: T-50305 wire loom
This harness takes care of the wires that hook up to the timer. For cars with a starter up to 1925, you will use this harness. It also takes care of the right side lighting OEM: T-5031 7 wire loom
This harness takes care of the wires that hook up to the timer. T-Ford 1926-27 cars with the coil box mounted on the motorOEM: T-5031-B
Ford used this switch on the 1926-27 models. Mounts to the starter bendix cover and is activated with the outward movement of the pedal shaft OEM: T-3158
Excellent quality made to the original Ford blueprint with the exception of the finish. The original was silver plated which tarnished causing decreased performance. These have a vacuum metalized aluminum finish with 92-98% reflectability...
With FORD inscription in the glassT-Ford 1915-27T-6576-HX
Original rope type. Glue onto the reflector with the ends at the bottom with a slight gap to act as a water drainT-65782 pc set
T-6586-X
T-Ford 1915-166575BR
T-Ford 1926-27 OEM: T-6575-N
This cable plug fits in to the rear of the headlights T-Ford 1915-27 OEM: T-6592
Magneto Headlight Bulb, double contact. This bulb is for use with magneto powered headlights only. NOTE: This is NOT for use with 6 or 12 volt batteries.
6 Volt 32/50 watt headlightbulb for the Ford model T
15 mm
Switch plate with ignition and light switch2 keys includedT-Ford 1919-25
1926-27 switch plate, Chrome finishOn the right side of this plate you need to install an Ampere meterT-5012-D
Ford started using these adapter rings on the model T dashboard in 1926 to use the smaller amp meter.This adpter ring can now be used for older models also.
Large style amperemeter, Exact replica of the original amp meter for the model TT-Ford 1919-25TT-Truck 1919-27T-5016
T-Ford 1926-27A-Ford 1928-31With Ford logo
2 x M10 connection cable19 mm dashboard mounting hole
Fits to the H7251 master switchØ 60 mm ODØ 20 mm ID
This brake light switch is designed especially for Model T's. Comes with a heavy duty 60 amp sealed switch that can handle 2 stoplights, works on 6 or 12 volts and mounts on the back of the transmission cover. Unlike other stoplight switches, this on...
ACCESSORY STOPLIGHT, polished brass beautiful reproductionThe word "STOP" appears in a red lens when lit.