These bushes are used on tubular-style shock absorbers, each shock used two upper & two lower. Also used on the stabilizer track bar. 4 are required for front bar & 4 are required for rear. Ford 1942-52 OEM: 51A-18197 Priced each

Hardened steel king pins & all hardware. Eliminate unsafe slop and wobble from worn front end parts. Complete for both sides. Ford 1937-41

This bolt has a longer shoulder that must be machined 1/16" for use on old steel drums. These bolts must be swedged under 30 to 40 tons of pressure & should be done by an expert at a machine shop. The longer shoulders are designed for the c...

Ford Hydraulic Brake Drum Hub Bolt - Front Or RearBolt: 14.22 mm x 39.6 mm, straightThread: 1/2" x 20OEM: 68-1107

Ford V8 1939-52OEM: 91A-7011136

Ford V8 car 1939 - 1951 Cylinder: Ø 34.9 x 25.4 mm OEM: 21A-2061

Ford V8 auto 1939 - 1951 Cylinder: Ø 34.9 x 25.4 mm OEM: 21A-2062

Ford V8 car 1939 - 1948 Ford 1/2 ton pickup: 1939-47 Cylinder: Ø 28.5 x 25.4 mm OEM: 91A-2261

Ford V8 car 1939 - 1948 Ford 1/2 ton pickup: 1939-47 Cylinder: Ø 28.5 x 25.4 mm OEM: 91A-2262

Spring, Boots & CupsFord 1942 - 51, Cups: 1-3/8" x 1" (34.90 x 25.4 mm)OEM: 21A-2221

Fits Ø 34.9 mm cylinder diameter. Used with cylinder number: 92Y-2261.Ford 1939-52OEM: 91T-2121

Fits Ø 28 mm cylinder diameter. Used with cylinder number: 91T-2261. Ford 1939-52 OEM: 91T-2128

Rear wheel cylinder Diameter culinder 25.4 - 28.6 mm Fits Ford auto 1939-1948 Ford Mercury 1938-1948 Ford 1/2 ton Truck: 1939-1947 OEM: 91A-2128 

Inside diameter : Ø 11.50 mm Outer diameter : Ø 17.44 mm Thick: 1.2 mm

Inner diameter : Ø 15.06 mm Outer diameter : Ø 20.62 mm Thick: 1.2 mm ​OEM: 91A-2151

Front Brake Hose Total Lenght: 400 mm OEM: ​99A-2079-A

Rear Brake hose (Center hose) Ford V8Ford 1939-1948 ( Or older models fitted with the later hydraulic brake system )Lenght: 22.20 cmOEM: 91A-2078-A

Ford V8 1939-1952 Piston: Ø 26.98 mm Fits: 1939-1948 Car 1939-1947 1/2 Ton Pickups 1948-1952 Ford F1 pickup OEM: 91A-2140

Ford 1939-56Bolt Lenght: 35.8 mm

Ford 1939-48  ​OEM 99A-2076 

Ford USA 1939-48Use Only On Steel Brake LinesOEM: 91A-2133

Rear Axle brake connector Ford V8 1941-48 OEM: 99A-2074

Brake line splitter for mounting on the rear axle Ford 1948-64 OEM: 8A-2074

This mechanical switch mounts near the brake pedal and has an arm that can be bent to suit your needs. When in the rest position, the brake light switch circuit is closed.  It breaks the circuit when it is pushed, making the brake lights act ...

High Quality brake light switch Thread 1/8" x  27 NPT Low-pressure switch, which will come on sooner Brake fluid: DOT3, DOT4 or DOT5 

Brake Light Switch with 1/8"x 27 NPT thread OEM: 11A-13480, 63-11306

Ford V8 1935-36Lenght spring: 168 mmOEM: 48-2472

Ford V8 1937-38Cable Lenght: 1.52 mtrOEM: 78-2853-A

Ford 1932-79Zinc Plated - 1/2 X 20 Threads

Ford USA 1935-48 Diameter: Ø 68.33mm. x 39.67 mm OEM: 48-1190-A