Half-moon Inspection Plate that goes at back of oil pan.A-Ford 1928-31A6398

A7223

A353050S

Gear shift lever is held in place in housing by this long spring. 6" (15cm) long.OEM: A7227

For the removal or installation of your gear shift lever spring A-Ford 1928-31  

Holds long spring in place on gear shift leverOEM: A7228

A-Ford 1928-31

Chrome plated gear shift lever will fit all of the A's A-Ford 1928-31 OEM: A-7210

Complete set of bolts and lock washers to attach the transmission tower to the transmission A-Ford 1928-31 OEM: A-7222-MB Torque: 11 Lbs.

Drilled for saftey wire. Install grease fitting on the retainer at the bottom. Bolts hold the retainer to the rear of the transmission case. Torque to 35 ft. lbs

Pen voor versnellingspook geleiding. Latere uitvoeringen A-Ford hadden deze enkele pen die bovenin het schakeldeksel zit en voorkomt dat de versnellingspook gaat roteren.  Herkenbaar aan een schroefdop welle de versnellingpook aan het schakelde...

3/4" BSP Ford 1928 - 1948 OEM: A7005

This plug will help to eliminate oil leaks. Need 2

Seals both transmission shafts to minimize leakage. Not originally used, but a great idea

Mounts inside the bell housing and seals the two holes where the shifting rails stick through. This is a common area for oil to leak by. Installs through the inspection cover plate of the bell housing A-Ford 1928-31

Complete drive that includes the shaft and the gear. Only available for standard ratio rear ends. This is the assembly that bolts to the bottom of your torque tube and the speedometer cable threads onto this A-Ford  Ratio: 3.78 Cable end: ...

Complete drive that includes the shaft and the gear. Only available for standard ratio rear ends. This is the assembly that bolts to the bottom of your torque tube and the speedometer cable threads onto this A-Ford 1928-29 Ratio: 3.78 Cable end...

Complete drive that includes the shaft and the gear. Only available for standard ratio rear ends. This is the assembly that bolts to the bottom of your torque tube and the speedometer cable threads onto this A-Ford 1930 Ratio: 3.78 Cable end: R...

Special 600W oil for the rear axle of the model T ( 1 bottle needed for the standard axle)Model A, for rear axle and steering housing. ( 2 bottles in total needed)Model A Transmission, 1 bottle needed Bottle contains 1 Quart or 950 ml