Ford 1928-29 drum tail light license bracket. Steel mint reproduction. The license bracket on the drum tail lamp is incorporated into the back housing of the lamp that the components are built off of

A-Ford 1928-31 ​OEM: A-13406

Rear light bracket kit LH &, RH. will fit the following tail lights: AL1017, AL1017, AL1025, AL1029 &, AL1030. But with small adjustmets other tail lights can be made to fit. Lenght brackets 20 cm

This plate is used under the fender when attaching the tail light bracket to the fender. Prevents fender from cracking A-Ford 1928-31 OEM; A-13463

This bracket mounted to the body sub-frame with three bolts. It is for the Coupes Roadsters that used the drum style tail light.  A-Ford 1928-29 OEM: A-13471-AL

This bracket mounted to the body sub-frame with three bolts. It is for the Coupes Roadsters that used the drum style tail light. The A only had one on the left originally, so if you want to add a right tail light, you will have to drill the body sub ...

Pair of chrome fog lights. Fitted with 6 Volt halogen bulb, Can be replaced to 12VGlas diameter 100 mmHoogte van de lamp totaal is 13 mmDiepte van de lamp is 7 cm ( inclusief glas)

How many times have you driven for miles with your turn signal left on? This small beeper can be wired into your turn signal lever to alert you when the lever is activated Voltage 6 to 12 Volt

USB Charge Ports to your phone, tablet, GPS navigation system, or other USB powered devices. When you turn off your vehicle, it shuts down the charge ports automatically too so you won’t drain your battery. There is even an emergency override button ...

A set of molded rubber pads that fits between the tail light mounting bracket and the rear fender. Has a 3 mm rolled edge. Sold as a pair A-Ford 1928-31

Univeral adjustable wiper arm with hook in blade Arm: 7 1/2" arm extends to 11 1/2" ( 19 up to 29 cm) Hook and saddle style Made to clamp down on a shaft that is.235" (Ø 6 mm) in diameter. Blade: Lengt of 19 cm with stai...