Complete domelight assembly with on/off switch Outside diameter: Ø 121 mm Mounting hole diameter: Ø 85 mm Fits: A-Ford Coupe 1930-31 OEM: A-13771

A replacement slide type switch and escutcheon that mounts to the door pillarA13752

This replacement cover, which mounts on the door piller, goes over the replacement switch

Fits the 1928-30 A-Ford with the oval speedometerA-13705-AR

Lamps have a chrome bezel and mount between the bumpers without modification. Use on the front or the rear. A-Ford 1928-31

Mounts between the upper and lower bumper bars using your bumper clamp bolt, so no extra holes or creative mounting are required! 6 volt lamps have an integrated resistor so they will work with standard thermal flashers. If you are running 12 volts y...

Now you can have super bright LED turn signals for your "A". Logo Lites - Made in the USA!! Kit includes LED turn signals, stainless steel brackets, controller and wire. The easy hookup connects to 6 Volt or 12 Volt cars with negative or positive gro...

Externally, these lights look just like our regular stock cowl lights, but these have the dual filament bulb and socket already installed for turn signals. Come with 12 volt bulbs but can be changed to 6 volt.

Externally, these lights look just like our regular stock cowl lights, but these have the dual filament bulb and socket already installed for turn signals. Come with 12 volt bulbs but can be changed to 6 volt.

A-Ford 19230-31A-13308-D

Highly polished stainless steel rim.A13306AR

A13309A

Set of two gaskets  A13309C

The AR headlights had a 5/8" (15 mm) hole in the back of the headlight and used this set for the wires from the radiator shell to the headlight and horn A-14578-AR

Chrome conduits for wire to go from radiator shell to headlight and horn OEM: A-14578-S

Stainless Steel Conduits for the wire to go through from the radiator shell to the Headlights and horn

Outside diameter: Ø 22 mm A-Ford 1928-31 ​OEM: A13073-S

2 wire system A-Ford 1928 Diameter plug: Ø 15 mm OEM: A-14584-AR

A-Ford 1929-31 Diameter plug: Ø 17.6 mm OEM: A-14584-B

Highly reflective aluminum finish that provides the same reflective quality as the original silvered reflectors. The finish is sealed so it won't tarnish like silver. Other reproductions don't have the proper depth to allow the head lamp bulb...

Highly reflective aluminum finish that provides the same reflective quality as the original silvered reflectors. The Finish is sealed so it won't tarnish like silver. Other reproductions don't have the proper depth to allow the head lamp bulb...

A good reproduction of the original fluted headlight glass Used on the model A from 1928 tru march 1929A-13060-AR

A13060

Use 3 pieces per light. These hold the lens to the rim.

2 x 10/32 screws & 2 springs to adjust the beam. Goes through back of headlight and spring goes between socket and back of light.A-Ford 1928-29Replaces: A13101/2A

2 x 10/32 screws & 2 springs to adjust the beam. Goes through back of headlight and spring goes between socket and back of light.A-Ford 1930-31Replaces: A13101/2B

Complete socket assembly for the A's. 3/4" (19 mm) hole in the backA-Ford 1928-29OEM: A-13075-B1

Complete socket assembly for the A's. 2 bulb stule3/4"" hole in the backA-Ford 1929-30OEM: A-13075-BR

Set contains 2 gaskets to do both headlights Material: Neoprene 5 x 5 mm OEM: A-13066

Clip that holds the headlight rim in place Polished Stainless steel A-Ford 1928-31 OEM: A-13059