BMC motor aanhaalmomenten:
Kopbouten: 100 Lb (13.8 kg/m)
Drijfstang lagers: 60 Lb. (8.3 Kg/m)
Hoofdlager moeren, met slot. 83 Lb. (11.5 Kg/m)
Hoofdlager moeren, Nyloc. 100 Lb, (13.8 Kg/m)
Vliegwiel bouten: 100 Lb. (13.8 Kg/m)
Injector Sleeve BMC / Nuffield
Fitted to the following BMC cylinder heads: 28TD/ 2893 and up 34TD/ 101 and up 38TD/ 5955 and up 5.7VD/ 2779 and up Lelyland 4/98 Leyland 6/98 The injector sleeve outside diameter is 26.7mm (1"1/16) at the open end OEM...
Injector Sleeve BMC / Nuffield
Injector sleeve is fitted to the following BMC cylinder heads: 26T/ 101 on 28T/ 101 on 28TD/ 101 to 2892 34T/ 101 on (and OEA engine) 38T and TA/ 101 on 38TD/ 101 to 5954 5.1 most engines 5.7J and JC/ 101 to 2778 on The inject...
Intake Valve Leyland Marchall
Leyland: 255, 262 270, 272 472, 475 Marshall: 602, 604 702, 704 802, 804 Stem Ø 8,74 mm Total lenght 148,2 mm Head Dia 43 mm Angle 45 graden oem: 86k943
Intake valve Nuffield 3DL to 10/60
Intake valve Nuffield 10/42, 10/60, 3/42, 3/45, 3DL, 4/60, 4/65, 4DM Head Diameter: 39.6mm, Stem Diameter: 8.7mm, Length: 146.0mm, Seat Angle: 45°OEM: AMK1567
Exhaust valve Nuffield 3DL to 10/60
Exhaust ,valve Nuffield 10/42, ,10/60, ,3/42, ,3/45, ,3DL, ,4/60, ,4/65, ,4DM Head Diameter: 35.6mm, Stem Diameter: 8.7mm, Length: 146.0mm, Seat Angle: 45°OEM: AMK48
Inner Valve Spring Nuffield BMC
Nuffield 10/42, 10/60, 3/45, 342, 344, 384, 3DL, 4/60, 4/65, 4DM BMC 2.6, 3.4T, 3.4TD / 2.8T, 2.8TD, 3.8T, 3.8TA, 3.8TD. OEM: AMK82
Outer valve spring Nuffield
Nuffield 10/42, 10/60, 3/45, 342, 344, 384, 3DL, 4/60, 4/65, 4DM BMC 2.6, 3.4T, 3.4TD / 2.8T, 2.8TD, 3.8T, 3.8TA, 3.8TD. OEM: AMK81
Inlet valve guide, Nuffield 3DL to 10/60
For Nuffield 10/42, 10/60, 3/42, 3/45, 3DL, 4/60, 4/65, 4DM OEM: 86K144, CMK205
Exhaust valve guide, Nuffield 3DL to 10/60
Nuffield 10/42, 10/60, 3/42, 3/45, 3DL, 4/60, 4/65, ,4DM OEM: 86K148, CMK206
Piston, Nuffield 3DL, 4DM. 95mm bore
OEM: 37D976, 86K140, AMK1596, AMK1767
Piston, Nuffield 10/42, 10/60, 3/42, 3/45, 4/60, 4/65.
Nuffield: 10/42, 10/60, 3/42, 3/45, 4/60, 4/65 Boring: 100 mm.. OEM: 37D426
Piston ring set, Nuffield 3DL, 4DM. 95mm bore
Top: 3.8 mm Trapezium2 x : 2.4 mm2 x oil control : 6.2 mmOEM: AHM9023
Piston ring set, Nuffield 10/42, 10/60, 3/42, 3/45, 4/60, 4/65.
100 bore BMC 2.8T,2.8TD, 3.8T, 3.8TA, 3.8TD Engines.OEM: AHM9025
Piston ring mounting plier, 50 - 100 mm
Piston ring compressor, 60 to 175mm
Piston ring compressor, For mounting the piston with rings easily in to the engine liner
Engine liner, Nuffield 3DL, 4DM
95mm bore. 11 mm Lip3DL -- 2.6, 4DM -- 3.4TOEM: 37D2136
Engine liner, Nuffield 10/42, 10/60, 3/45, 4/60, 4/65
100mm bore 11 mm. lip. , 223mm height OEM: 37D425, ,CMK169Tip: Also order liner o-ring item NU8013
Engine liner, Nuffield 10/42, 10/60, 3/45, 4/60, 4/65
100mm bore 11 mm. lip. 221mm height OEM: 37D1837, 37D346 Liner seal NU8012 is needed with this liner
Engine liner seal, Nuffield 10/42, 10/60, 3/42, 3/45, 3DL, 4/60,
OEM: AMK61 Fits engines up to serial number 3054. If you are not sure wich liner seal you need, please contact us then.
Engine liner seal, Nuffield 10/42, 10/60, 3/42, 3/45, 4/60, 4/65
OEM: 37D1557 Fits engines serial number 3054 and up. Ø 107 mmIf you are not sure wich liner seal you need, please contact us then.
Liner shim, nuffield
Shim 0.005" , or 0.13mm OEM: AMK1971.
Con rod bearing set, early Nuffield engines
Fits the BMC 2.6, 2.8, 3.4 & 3.8 engines fitted to all early models with scrolled crank Standard size of 61.87 mm (2.436")
Connecting rod bearing set Nuffield
0.010" oversize Fits the BMC 2.6, 2.8, 3.4 & 3.8 engines fitted to all early models with scrolled crank Standard crank pin diameter 2.436" (61.87 mm) + 0.010" OEM: 8G2370-010
Connecting rod bearing set Nuffield
0.020" oversize Fits the BMC 2.6, 2.8, 3.4 & 3.8 engines fitted to all early models with scrolled crank Standard crank pin diameter 2.436" (61.87 mm) + 0.020" OEM: 8G2370-020
Connecting rod bearing set Nuffield
0.040" oversize Fits the BMC 2.6, 2.8, 3.4 & 3.8 engines fitted to all early models with scrolled crank Standard crank pin diameter 2.436" (61.87 mm) + 0.040" OEM: 8G2370-040
Std. rod bearing set, Nuffield
Nuffield 3DL, 4DM, 4/60, 4/65, 10/6010/60 >49184, OEM: 8G2370Standaard tapmaat: 66.66 - 66.67 mm
Con rod bearing set 0.010" Nuffield
Nuffield 3DL, 4DM, 4/60, 4/65, 10/6010/60 >49184, Standaard tapmaat: 66.66 - 66.67 mm
Rod bearing set Std. Nuffield 3/45, 4/65
Leyland: 255, 262, 270, 272, 344, 384, 462, 472, 482, 602, 604, 702, 704, 802, 804Nuffield:3/45 4/65 OEM: 37D541, 8G2484, 8G2486
Rod bearing set 0.010", Nuffield 3/45, 4/65.
Leyland: 255, ,262, ,270, ,272, ,344, ,384, ,462, ,472,482, ,602, ,604, ,702, ,704, ,802, ,804Nuffield:3/45 4/65 OEM: 37D541, ,8G2484, ,8G2486 .
Main bearing set, Std. Nuffield
Nuffield 4/60, 4/65, 10/60, 3/42, 3/45, 10/42, 3DL, 4DM Leyland: 255, 262, 270, 272, 285, 344, 384, 462, 472, 482, 602, 604, 702, 704, 802, 804 Standard size Standard crankshaft journal: 82.53 mm - 82.55 mm OEM: 8G2483, 37D529, 37D530, 8G...
