If you need to separate your tractor, for example, to replace the clutch, you'll need these special rails. The fixed end goes under the rear of the tractor, and the movable part is securely placed under the clutch housing or engine oilsump, depen...

Testresult bij 4 indicating LED's Will test the following brake fluids:, DOT3, DOT4, DOT5.1 Not for DOT5. Diameter ca. 20 mm Works on 3 x  AAA battery's (included)

2pcs 165mm + 2pcs 240mm Set includes:(2) Contoured Tip and (2) Spoon Tip Lengths: 5-1/2 and 8-1/2 in Allows for easy removal of seals and o-rings without damaging the seal or the finished surface Material: carbon steel, heated, 48HRC, CRV Stee...

Lenght: 220 mm.  

SlagtrekkersetProfessionele slagtrekker voor in- en uitwendig trekken met 2 of 3 haken,te gebruiken als steekastrekker, wielnaaftrekker, remtrommeltrekker en plaatwerktrekker.Inhoud:- 3 sets haken- 2 flenzen- Schroefspindel/schuifhamer- Trekhaak- Top...

14pc. Bearing puller kit

16 pc puller kit. To remove bearings etc from blind holes

1/2" square

Pump for bleeding brake systems, measuring Turbo pressure etc.63.5 mm dial, Pressure/vacuum gaugeVacuum 0 to -1 barPressure: 0 to 3 bar

Key sizes: 1/4", 5/16", 3/8" 7/16", 1/2", 9/16" 5/8" 11/16".High quality set

16 pc set in high quality materialMaten: 1/4, 5/16, 3/8, 7/16, 1/2,9/16, 5/8, 11/16, 3/4, 13/16, 7/8,15/16, 1, 1.1/16, 1.1/8 en 1.1/4.

Set includes: 15 sockets 1/2": 3/8,7/16,1/32,1/2,9/16,19/32, 5/8,11/16,23/32,3/4,7/8,15/16, 11/16.13/16 and 1-1/4 Ratchet Extensions Spark plug sockets 21mm & 16mm Universal joint 3-way adapter

Sockets 7/8", 15/16", 1", 1-1/16", 1-1/18", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-5/8", 1-3/4", 1-13/16", 1-7/8" en 2".

1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 en 3/8 inch.

Up to 150 mm Clear digital display.Gives digital measurements in milimeters and inchBettery included

5- pc kit with 2 handles and 3 forksFork sizes 17, 24 en 28 mm.

Fork opening: 15/16" (18 mm)Lenght: 30 cm

- Expander 54 - 89 mm.- Expander 38 - 64 mm.- Expander 28 - 44 mm.

Usable for single or double folding of copper tube and steel tubeTube sizes: : 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8".

Kit for punching holes in leather or gasket paperSizes: 3, 4, 5, 6 and 8 mm

Sizes: 1/32", 1/16" en 3/32". (1.6, 2.4 en 3.2 mm)

3 chisels of 10 (3/8"), 12 (1/2") en 16 (5/8") mm. High quality

Set1 x 1,5 mm1 x 3 mm1 x 4 mm1 x 5 mm1 x 6 mm1 x 8 mm

6,35 mm. (1/4") 6-hoekige schachten. HSS 3x 4,6,8,10,12mm. 4,6,8,10,12,14,16,18,20mm.4,6,8,10,12,14,16,18,20,22,24,26,28,30,32mm.

13 pc set.0.05 - 1.00 mm

13 Blade set in INCH thickness 0.002" up to  0.040"