Fits model 50, 60, 70, 520, 530, 620, 630, 720 &, 730

John Deere A, AN, ANH, AO, AR, AW, AWH, B, BI, BN, BNH, BO, BR, BW, BWH, D, DI, G, GH, GM, GN, GP, GPO, GWDLTX carburateur: DLTX10, DLTX11, DLTX13, DLTX15, DLTX16, DLTX17, DLTX18, DLTX19, DLTX24, DLTX3, DLTX31, DLTX33, DLTX34, DLTX38, DLTX39, DLTX5, ...

Fit later model A, B, L, 50 &, 60 DLTX 65, 71, 72 &, 73

John Deere - A, B, D, G (With DLTX24 Only), GP, 50 (All fuel only (up to SN: 5015950), 60 (All fuel only (up to SN: 6013899)Carb Mfg #'s - : DLTX10, DLTX15, DLTX16, DLTX18, DLTX19, DLTX24, DLTX33, DLTX34, DLTX41, DLTX53, DLTX63, DLTX67, DLTX71, DLTX7...

John Deere G with DLTX51 carburetor. This is the so called Big nut Replaces: R10155 R10155R

R10156R

John Deere: A, B, D, G, GP 50 All fuel only (up to SN: 5015950) 60 All fuel only (up to SN: 6013899) OEM: R10078R

John Deere  A G D The jet, mounted vertically in the DLTX carburetor, is held up by the spring at the bottom, which, in turn, holds the float bowl in place with the retaining nut. Be careful not to overtighten the float bowl nut, as these ...

Choke dust Cover  DLTX numbers: DLTX67 DLTX71 DLTX72 DLTX73 John Deere: A, AR, AO B 50 60 OEM: R10157, 91-178

Used with the OEM flair fitting, Not compression fittingMale end (Screen end) is 1/8" pipe thread --- Female end is 1/4" flareFord Golden Jubilee, Jubilee, NAA, NAB, 2N, 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, 840, 850, 860, 8N, 900, 950, ...

AF2153R & AR1128R

"Special steel gland and nut. will fit the fuel and oil lines with 5/16"" , or 7.9mm tube."

John Deere B (SN: 60000 - 200999) Replaces: AB2751R MUST USE WITH 3-WAY VALVE

John Deere A (All Fuel SN: 655572 - 662728), John Deere A (Petrol SN: 477000 - 622820);Must be used with a 3 way valveReplaces: AA5067

A (SN: 584000 & up Petrol), 50, 60, 70, 520, 530, 620, 630 (Petrol) OEM: AA5777R

Cast iron base with brass handle and nut. Original setup for the all fuel tractors Models: A, B, D, G, GP &, H 3/8"pipe inlet and 1/4" male pipe outlet Must be used with the 3 way valve.OEM: AA499R

Outside diameter glass 54 mm. x 59 mm height

Cork-Neopren seal, fits the 52 mm wide sediment bowl glass(Outside diameter ring is 54.6 mm)Ethanol rsistant

Fits to a sediment bowl with 52 or 54 x 59 mm glass height

ID: 12.7 mmOD: 45.4 mm

3/8" thread for gastank, Pipe connection 1/8" 58 mm Tall glass bowl John Deere 2 cyl. petrol only engines Farmall H, M, MD ( petrol or diesel)

John Deere - A (sn 410859 - 476999) B (sn up to 11621)D (sn 30400 - 143799)GP;Vervangt: AD680R

Unstyled AR &, AO up to 259999.  Unstyled B with # 11622 - 59999. ,  BR, BO & G  with # 1000 - 12999  OEM: AB609R

A with serialnumber: 497590 - 697756,  AR &, AO with serialnumber: 260000 - 280849 B with serialnumber: 94494 - 305246 D with serialnumber: 148872 - 191777 G with serialnumber: 13000 - 59701 H with serialnumber: 20650 en hoger OEM: A...

Cork packing with graphite impregnatedFits all 3 way valves on John Deere 2 cyl modelsOEM: D2122R

Diameter 72.8 mmHeight 101 mmFarmall: SMD, SBMD, B450, ID6, ID9, MD, MDV, ODS6, Super MD, Super MDV, Super MDV-TA, Super MTA, Super W6TA, Super WD9, Super WDR9, TD14, TD6, TD9, WD6, WD9, WDR9, 400, 450, 460, 560, 600, 606, 650, 660 John Deere: 820 ...

Size O/D 75mm, I/D 57mm. Thick 3mm. Material: Cork NeophreneFarmall: SMD, SBMD, B450, ID6, ID9, MD, MDV, ODS6, Super MD, Super MDV, Super MDV-TA, Super MTA, Super W6TA, Super WD9, Super WDR9, TD14, TD6, TD9, WD6, WD9, WDR9, 400, 450, 460, 560, 60...

Fuel filter repair kit fits John Deere 2 cylinder models with autaomatic fuel shut off

Fits the automatic shut off valve on the 2 cylinder models2 items used per tractorWill resist E10A4983R

A, B, BO, BR (Used as a radiator cap on Unstyled tractors) ], [ AO, AR (Used as a radiator cap on Unstyled tractors up to SN: 259999) ], D (Used as a radiator cap on Unstyled tractors. Also used as a fuel cap on tractors with SN: 30400 to 109943), G ...