John Deere temp gauge. Export model
White face temp. gauge. Fitted on all 2 cylinder tractors who went for export when new. Very original copy !
Temperature gauge for air cooled engine
Ø 60 mm gauge. with M10 x 1.5 tread. Capillary lead 1.80 mtr Sensor Ø 5 mm x 31mm For aircooled engines Fits to Guldner G-serie Fahr, Porsche etc.
Temperature gauge Aircooled engines
Air cooled engine temperature gauge Diameter: Ø 60mm Mechanical operated Capillary: 1.8 meter. Feeler gauge: M10 x 1.25 Pin Ø 5 m x 31 mm
nneapolis Moline temp gauge
nneapolis Moline temp gauge
Universal Temperature Gauge for Aircooled engines
60 mm diameter gauge with M10x1.5 end. Capillary. 1.80 meter With overheating indicator (light will turn on red). Used on Porsche Diesel, Deutz, etc.
Allis Chalmers temperature gauge
Allis Chalmers B, C, CA, IB, RC, WC, WD, WD45, WF; D270, D272Replaces: 70213675, 213675
Temperature gauge in Fahrenheid.
Fits into a 2" (52 mm) diameter hole 72" (1.80 mtr.) long heavy duty capillary tube included (check length before ordering.) Measures from 100 degrees to 220 degrees Stainless steel step bezel 5/8" - 18 UF thread wit...
Temperature gauge for aircooled engines. 60 mm hole
Temperature gauge for aircooled engines. 60 mm hole
1.80 mtr, wire lenght Connection to engine: nut size M10 x 1.5 mm
Smiths model temperature gauge.
Old style temperature gauge. 52 mm outer diameter. 5/8" thread. , Will fit most thermostat housings or engine blocks 30 to 100 degree celcius.Fits also Ferguson TEA, TED, TEFFord 2N, 8N, 9N.
Fendt Dieselross temperature gauge
60mm diameter, capilary with M10 x 1.5 mm, For use in aircooled engines
M.A.N. Temperatuurmeter
60mm mounting hole. electrical use
Adapter 5/8" to 1/2"
Fits all temperature gauges with 5/8 " end. makes a water tight fit to the engine with 1/2" tread.
Adapter for temperature gauge M14 - M10
Adapter for temperature gauge M14 - M10 x 1
Adapter for temperature gauge M16 - M10
M16 x 1.5 to M10x1
Adapter for temperature gauge M18 - M10
Adapter for temperature gauge 5/8" - M10.
5/8" UNC outer tread and M10x1 inner tread.
Adapter for temperature gauge 1/2" NPT x M10 x 1
Universal adapter fits in a waterhose
With this adapter you will make a easy temperature gauge connection ikn the coolant hoseDrill a 14mm hole in the excisting waterhose and connect this adapter. The adapter has an M10x1 inner thread
Temperature sensor. 12V
5/8" UNF Massey Ferguson 100 Series: 133, 145, 148, 152, 158, 168 200 Series: 230, 240, 245, 250, 265, 275, 285, 290, 298 2600 & 2700 Series: 2620, 2640, 2645, 2675, 2680, 2685, 2720, 2725 300 Series: 350, 352, 362, 365, 3...
12V temperature sensor
M14x 1.5 tread, fits most electrical gauges
On dash or under dash mounting panel
Every Temp- oil- amp or other gauge with a diamameter of 52 mm will with this on dash or under dash mounting bracket
On Dash or Under Dash Mounting Panel
Every Temp- oil- amp or other gauge with a diamameter of 52 mm will with this on dash or under dash mounting bracket
