Demountable rim bolt, cadmium plated. 4 per wheel, 16 per car

Mirror diameter 12.5 cm. cast iron support 16.5 cm long. Mounts to a (wooden) support of a car of truck

Fits bolt H9631T-2848

Black rubber mat with FORD script

This gasket goes on the bottom - put in first - & sides of the steel windshield frame. Rubber gaskets stretch when you install them so wait a day to trim for a tighter fit

Ford: 28 - mid '30 Closed Cab Pickups, 28-30 Coupes, 28-30 Tudor. This is the standard window riser. Mounts to a 3/8" square shank on regulator. Chrome, attaches with included set screw or optional pin mount pins not included OEM: A...

This is the standard escutcheon which fits between the window riser handle and the upholstery. 1 5/8" diam. X 5/8" high. Used on: 1928 - Mid 1930 CC Pickup, 1928 - 1930 Coupe & Tudor ​OEM: A-48139-A

Dual rubber blade

Lever extensions, decorative polished brass accessory. Can be used on door levers or spark and gas rods. Also extends the spark and gas rods for easier accessFord 1919-27

Cone-shaped. Fits behind upholstery panel against escutcheons to keep everything tight ​OEM: A-48284

Rubber floormat

Wooden spoke made of HickoryReplace the dry rotted spoke before it will brake at the tenonsTenon size 12.7 mmFits 30 x 3 1/2" wheels

Replace the dry rotted spokes of your model t and prevent the bearing on the tenonTenon diameter 15.8 mmMade of Hickory woodFits 30 x 3 1/2" rims

These brackets bolt to the radius rod and support the brake rod in the middle. T-Ford 1914-27OEM: T-3470-L

RH bracket, These brackets bolt to the radius rod and support the brake rod in the middleT-Ford 1914-27OEM: T-3470-R

These lined brake shoe set is the better way of nowaday stopping with the model TT-2566-RE

Replace the worn out or broken brakedrum for the wooden wheel modelsStill made by the company who made them when the Ford was new !T-2818

The steel brake band for the 1926-27 only. Band comes with spring, but without lining OEM: T2566B

T-Ford 1926-27One set will do both side liningsNot for TT-TruckTech Tip:When installing brake linings begin riveting with the two center holes and work toward the outer ends. The lining should be clamped tight to the shoe. After the lining is install...

T-2557

T-2558

T-2558-B

T-2558-B

Steel bushPriced eachT-2559

Brass bushing.Priced eachT-2559-B

T-2570

2 pc. brake spring set for the larger 11 inch (28cm) drum

A hard wood treated block that fits between the frame and the steering bracketT-3546

Crank case arm blocks, pair. T-Ford 1909-27 T-3083