Suction gun for rear axle oil, for removing and filling 600W into rear end

Support the oil pan where the block and the hogs head meet. Slips under the lip of the oil pan to help prevent flex that can cause crankshaft failure

A die cut script "Ford" used in the early teens. Use fine wire to attach to core of radiatorMade of brass

A die cut script "Ford" used in the early teens. Use fine wire to attach to core of radiatorChrome

T-6392-B2 pc.

Diameter rubber: 75 mmSlips over a 5/8" tube (15.9 mm)With the brass trim ring at the base

Diameter rubber: 100 mmSlips over a 5/8" tube (15.9 mm)With the brass trim ring at the base

Ford Pickup Tailgate Latch Set - Cast Iron - Used On Wooden Pickup Boxes Or Depot Hacks

Step plates, solid brass, Ford script

Logo: 52 x 26 mm Bolt: Ø 6 x 25 mm ​OEM: A-16400-E

T-3664-E

Front licence plate holder, Mounts under the radiator T-Ford 1922-27 OEM; T-3664

T-Ford 1919-27

Drivers side. (LH) 3 hole mounting 3 hole mounting style used in the Coupes, Pickups and Tudors. Ours Fits! Painted black finish. 1928-31. Note on the Tudors, fronts and backs the same. OEM: A-48106-A Year: 1926-31

Set of 6 wheel hub bolts  Good for one front or rear wheel hub T-Ford 1909-27 OEM: T-2825-OR

Set with 6 hub bolt nuts, Good for one wheel T-Ford 1909-27 OEM: T-2825-A

Triangle leather hood corners on the rear of the bonnet only (Model A). Fits Model T as well. Comes with authentic style tube rivets T-Ford 1909-27 A-Ford 1928-31 OEM: A-16622-SL

From the outside, these look authentic, but inside they have modern ball type zerk fittings so you can grease the T with a modern grease gun. No more mess! 1/8" pipe thread. Used on early spring shackles, steering box, and rear axle

1/8" NPT threaded grease cup used on the rear axle & steering box.  Thread: 1/8" Diameter cup: Ø 21 mm T-Ford 1909-27 OEM: T-2545-B ​

Left hand mount OEM: T-3819-B T-Ford 1919 - 1927

Right hand side perch OEM: T-3818-B T-Ford 1919 - 1927

Key for Ford model T  1915-1925 Roadster turtledeck (trunk) ​OEM: T-9484-A