Piston ring and liner set. Fits all tractors with the 4" (101.6mm) bore BD-264 engine. This kit will also fit the BD-281 engine without any problems. OEM: 700783R91.

International Cormick Farmall BMD, Super BMD, BWD6 en B-450Single engine liner with 4" (101.6 mm) bore. Engine: BD264OEM: 356964R1

Piston with pin and piston rings. Engine bore: 4" (101,6 mm)Engine: International BD264Tractor: BMD, Super BMD, B-450, BTD6

5 pc. pistonring set, This set has 3 compression rings and 2 oil control rings. Fits the 4" or 101.6 mm bore BD264 engine.Ring setup: 1 x Compression ring 2,38 mm. Chrome2 x Compression ring 2,38 mm.2 x Oil control ring 4,74 mm.

4 pc. pistonring set, This set has 3 compresion rings and 1 oil control ring. Fits the OEM IH piston with the 4" or 101.6 mm bore engine OEM: 3114779R91

International Farmall: BMD, Super BMD, B450, SBWD, BTD6, BTD640, B100 met BD264 motorInternational B614, B634, BTD8, 125A met BD281 motor OEM : 701432R1 en 46203DHead diameter: 44 mm

International Farmall: BMD, Super BMD, B450, SBWD, BTD6, BTD640, B100 met BD264 motorInternational B614, B634, BTD8, 125A met BD281 motor Replaces: 701433R1 Head diameter: 37.5 mm

3 pc, cam shaft bushing set.

Replaces headgasket 700759R1

Bottom block gasket set. complet with rear crankshaft felt seal. Front carnk seal in not encluded.

Farmall I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, T6, W6, W6TA, 400, 450 benzine , BM, BMD, B450OEM: 46109DA

Lenght ca. 18 cm

Set standard rod bearings for one complete engine. OEM: 700665R91

Set 0.010" rod bearings for one complete engine.

Set 0.020" rod bearings for one complete engine.

Set 0.030" rod bearings for one complete engine. OEM: 700671R91

Standard crankshaft size New old stock Fits International engine: BD281  BD-281 Limited supply

Farmall: I6, M, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6-61, W6, 400, 450 WD9, WDR9 (Early diesels up to SN: 10265 BMD, B450, ( BD264 motor)OEM: 47496DB

Main bearing set in Standard sizeOEM: 700689R91, 700697R91

Set 0.010" Main bearings for one complete engine.

Set 0.020" Main bearings for one complete engine.

Set 0.030" Main bearings for one complete engine. OEM: 700695R91, 700703R91.

Farmall M, BM, BMD, Super BMD, 634, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, Super W9, T6, T6-61, I9, I6, T9, W6, W9, WR9, WR9S, 400, 450, 600, 650 Motor: C248, C264, C281, C335, C350, UC248, U264, U281, U6, U9, BD...

H (SN: 106907 & Up), H65C, H80B, HV (SN: 106907 & up), Hydro 100, Hydro 186, [ Hydro 70, 666, 766 (Diesel) ], [ Hydro 86, 686 (w/ D312 Diesel) ], [ I4, O4 (SN: 4113 & up) ], [ I6, O6, W6 (SN: 1990 & up) ], ID6, L175C, M (SN: 41346 & up), MD, MDV, MTA...

Brass ring fits under the injector holder and fits the pre combustion chamber. Size: 47.9 mm x 43.2 mm

Original Bosch DN12SD12 injector nozzleOpening pressure: 125 - 133 bar

This set contains 4 replaceable glowplugs and 4 adaptors. This conversion set will replace the OEM style 0.7V glow wire type plugs to 12V glow pencil type plugs. This set will give more heat and provide also a better starting.Set will contain:4 x glo...

Replacement glowplug for the BD8020 conversion set