Piston, Ring and Liner set Farmall BMD, Super BMD, B-450 BDT6
Piston ring and liner set. Fits all tractors with the 4" (101.6mm) bore BD-264 engine. This kit will also fit the BD-281 engine without any problems. OEM: 700783R91.
Engine liner, Famall BMD - B450
International Cormick Farmall BMD, Super BMD, BWD6 en B-450Single engine liner with 4" (101.6 mm) bore. Engine: BD264OEM: 356964R1
Piston with piston rings, Farmall BMD, SBMD, B450
Piston with pin and piston rings. Engine bore: 4" (101,6 mm)Engine: International BD264Tractor: BMD, Super BMD, B-450, BTD6
Piston ring set (5 rings), Farmall S.BMD, B450 (BD264)
5 pc. pistonring set, This set has 3 compression rings and 2 oil control rings. Fits the 4" or 101.6 mm bore BD264 engine.Ring setup: 1 x Compression ring 2,38 mm. Chrome2 x Compression ring 2,38 mm.2 x Oil control ring 4,74 mm.
Piston ring set (4 rings), Farmall S.BMD, B450 (BD264)
4 pc. pistonring set, This set has 3 compresion rings and 1 oil control ring. Fits the OEM IH piston with the 4" or 101.6 mm bore engine OEM: 3114779R91
Intake valve, Farmall S.BMD, B450, B614 etc.
International Farmall: BMD, Super BMD, B450, SBWD, BTD6, BTD640, B100 met BD264 motorInternational B614, B634, BTD8, 125A met BD281 motor OEM : 701432R1 en 46203DHead diameter: 44 mm
Exhaust valve Farmall S.BMD, B450, B614 etc.
International Farmall: BMD, Super BMD, B450, SBWD, BTD6, BTD640, B100 met BD264 motorInternational B614, B634, BTD8, 125A met BD281 motor Replaces: 701433R1 Head diameter: 37.5 mm
Cam shaft bearing set, Farmall S.BMD, B450 (BD264)
3 pc, cam shaft bushing set.
Headgasket set, Farmall (S)BMD, B450, BTD6, (BD264 & BD281)
Replaces headgasket 700759R1
Bottom block gasket set, Farmall BMD - B450 (BD264)
Bottom block gasket set. complet with rear crankshaft felt seal. Front carnk seal in not encluded.
Oil pan gasket, Farmall M, W6, BMD, B450
Farmall I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, T6, W6, W6TA, 400, 450 benzine , BM, BMD, B450OEM: 46109DA
Cylinder head stud, Farmall S.BMD, B450 (BD264)
Lenght ca. 18 cm
Con rod bearing set, Std. Farmall S.BMD, B450 (BD264)
Set standard rod bearings for one complete engine. OEM: 700665R91
Con rod bearing set. 0.010". Farmall S.BMD, B450 (BD264)
Set 0.010" rod bearings for one complete engine.
Con rod bearing set, 0.020". Farmall S.BMD, B450 (BD264)
Set 0.020" rod bearings for one complete engine.
Con rod bearing set, 0.030". Farmall S.BMD, B450 (BD264)
Set 0.030" rod bearings for one complete engine. OEM: 700671R91
Con Rod Bearing, 0.040". Farmall S.BMD, B450 (BD264)
Conrod Bearing Set. International BD281
Standard crankshaft size New old stock Fits International engine: BD281 BD-281 Limited supply
Connecting Rod Bolt Lock Tab, Farmall
Farmall: I6, M, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6-61, W6, 400, 450 WD9, WDR9 (Early diesels up to SN: 10265 BMD, B450, ( BD264 motor)OEM: 47496DB
Main bearing set, Std. Farmall S.BMD, B450 (BD264)
Main bearing set in Standard sizeOEM: 700689R91, 700697R91
Main bearing set, 0.010". Farmall S.BMD, B450 (BD264)
Set 0.010" Main bearings for one complete engine.
Main bearing set, .020". Farmall S.BMD, B450 (BD264)
Set 0.020" Main bearings for one complete engine.
Main bearing set, 0.030". Farmall S.BMD, B450 (BD264)
Set 0.030" Main bearings for one complete engine. OEM: 700695R91, 700703R91.
Mainbearing set 0.040" Farmall BMD, SBMD, B450. BD264 motor
Front crankshaft oil seal. Farmall
Farmall M, BM, BMD, Super BMD, 634, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, Super W9, T6, T6-61, I9, I6, T9, W6, W9, WR9, WR9S, 400, 450, 600, 650 Motor: C248, C264, C281, C335, C350, UC248, U264, U281, U6, U9, BD...
Manifold Hign nut. Farmall 7/16 UNF
H (SN: 106907 & Up), H65C, H80B, HV (SN: 106907 & up), Hydro 100, Hydro 186, [ Hydro 70, 666, 766 (Diesel) ], [ Hydro 86, 686 (w/ D312 Diesel) ], [ I4, O4 (SN: 4113 & up) ], [ I6, O6, W6 (SN: 1990 & up) ], ID6, L175C, M (SN: 41346 & up), MD, MDV, MTA...
Brass injector ring, Farmall S.BMD, B450 (BD264)
Brass ring fits under the injector holder and fits the pre combustion chamber. Size: 47.9 mm x 43.2 mm
Injector nozzle, DN12SD12
Original Bosch DN12SD12 injector nozzle Farmall: B450, BMD, F240, F270, SUPER BMD Openingsdruk: 125-133 bar Fiat 211 , 215 , 312 , 315 , 411 , 415 , SOM20 , SOM25 ,&n...
Glow plug conversion kit. Farmall S.BMD, B450 BTD6 (BD264 & BD281)
This set contains 4 replaceable glowplugs and 4 adaptors. This conversion set will replace the OEM style 0.7V glow wire type plugs to 12V glow pencil type plugs. This set will give more heat and provide also a better starting.Set will contain:4 x glo...
Glowplug for BD8020 conversion set
Replacement glowplug for the BD8020 conversion set
