Piston and ring set, for one engine, Standard size Bore 66.7 mm.

Piston and ring set, for one engine, 0.020 inch oversize .

Piston and ring set, for one engine, 0.040 inch oversize .

Pistyon and rings for one Farmall Cub engine. Overbore kit in 0.060"  

Farmall Cub, 154, 184, 185, Cub LoBoy: Cub Loboy;Bearings sold separatelyReplaces: 357247R1, 353743R93, 251264R1, 353743R93, 527821R92

Specifications: Inside diameter: Ø 241.17 mmOutside diameter: Ø 271.22 mm84 TeethOEM: USA 251270R2

Set rod bearings for one engine, Standard size, Width of bearings 19.3 mmStd crank diameter 1.6245/1.6250

Set rod bearings for one engine 0.010" oversize, Width of bearings 19.3 mm

Set rod bearings for one engine, ,0.020" oversize, Width of bearings 19.3 mm

Set rod bearings for one engine, ,0.030" oversize, Width of bearings 19.3 mm

251247R1

364692R91For use on all models with C60 engines.rear seal must be used w/late retainer # 251363R2, seal will NOT fit tight in early retainer # 251363R1When do fitting in the R1 retainer use loctite 660 or something similar to retain seal into the R1 ...

Belt pulley gearbox seal: 300, 350, 460, H, HV, I4, I6, ID6, Super H, Super HV, Super W4, W4, W6, WD6, Fits some of the following to Sn: 19202 as a belt pulley gearbox seal (measure BEFORE ordering as there were 2 different sizes).: M, MD, MDV, MV; F...

251260R1

251261R2

352973R3

Sold per piece

Intake or exhaust valve OEM: 251262R2

Set pistonrings for the 0.020" oversize pistons Set will suit one engine.

Set pistonrings for the 0.040" oversize pistons Set will suit one engine.

Piston ring set for 4 pistonsOversize 0.060"

Headgasketset Fits for the French and USA made Farmall Cub. Engine C-60

Overhaul gasket set including engine oil sealsFor use on all models with C60 engines.rear seal must be used w/late retainer # 251363R2, seal will NOT fit tight in early retainer # 251363R1When do fitting in the R1 retainer use loctite 660 or somethin...

251369R1

Farmall Cub, 154, 184, 185;OEM: 251232R1, 405023R2