1918-27

Ton Truck REAR hubcap, Chrome plated. "Ford MADE U.S.A.". 2-7/16" (61.6 mm)Outside diameter. Front hubcaps used on Ton Trucks are the same as the wood wheel caps used on cars. Replaces: T-2819

Special puller for removal of old bushing (H8894)

Emergency brake lining kit with rivets, Set for both sidesTT-1918-27

Ton Truck emergency brake shoe return spring, 2 per truck, Sold eachTT Truck 1917-27

TT-truck 1918-28

Modern oil seat set. replaces the oem style felt seal Kit will do both sidesSeal: 76 x 41.2 mm

The outer felt that goes between the outer bearing and the axle housing cap on the TT-Trucks OD: Ø 90 mm ID: Ø 30 mm ​  Ford TT truck 1919-1927 OEM: TT-1021

Ford TT Truck 1919-27 OEM: TT-1039 Outder diameter: Ø 70 mm

Ton Truck axle housing cap set. 6 piece set includes; 2 outer housing caps, 2 felts and 2 washersOEM: 1021, 1022, 1023

1918-27OEM: 1019

1918-27OEM: 1020

1919-27 Model TT Axle Gear Lock Rings

TT-Ford 1919-27

Used on the rear wheels of the TT trucks. Does not fit Kelsey wheels. Need 6 per wheel.TT1107CFord 1919-27

made of Hickory and available for the Ford 20" wheel only. Spoke length is 7-5/16". (185.7 mm)

20" rim flap for Ton Truck. Helpful hint: Flaps are 5" wide bands of heavy rubber. They greatly increase the life of your tubes, help prevent pinching when mounting and protect the tube from chaffing on the rim as well as from mounting tool...

20 X 6.00 tube, rubber stem (30X5). Rubber stem tubes fit either wood or wire wheels

20 X 600 Lucas tire, all black, for ton truck rear wheels only

Complete set does both doors on the steel TT Truck cab. Mounting diagram included

Leather straps with nickle eyelets that are used to raise and lower the window glass in the doors of the steel TT truck cabsTT126261919-27

Outer door handleThese fit the TT steel truck cabs. They come in an as cast form and require fitting and polishing. The inside handle will need to be drilled and tapped for the set screw.TT12628

Inner door handle These fit the TT steel truck cabs. They come in an as cast form and require fitting and polishing. The inside handle will need to be drilled and tapped for the set screw. TT126291925-27

You will need a total of eight of these. 4 hold the bottom of the lower windshield frame to the cowl, and 4 hold the upper frame glass clamps. A set consists of 1 screw and 1 sleeve nut

Made just for the one ton trucks. Clips and center bolt includedTT38011919-27

Springs come with center bolt and bushings installed. Sold as pairs onlyTT3824Ford 1929-27

Battery carrier TT Ton truck, Steel. Three piece battery carrier.TT-Truck 1918-27