• From our own stock
  • Daily Shipment 
  • More than 30 years experience
  • Pay after
  • Pick up at our shop
Starter and generator (55)
Generator cut out. new style. Ford

Generator cut out. new style. Ford

Art.nr. H9245

This semiconductor (state of the art) unit modernizes and replaces the original relay type of past years. It is identical to original exterior appearance and dimensions and is plated in cadmium as original. Also includes authentic insulators and hard...

€ 69,01
Excluding tax
Semi Conductor Cut Out with Script

Semi Conductor Cut Out with Script

Art.nr. A10505F

This semiconductor unit modernizes with FORD script on the cover. It is identical to original exterior appearance and dimensions and is plated in cadmium as original. Also includes authentic insulators and hardware. It is designed to continuously han...

€ 90,08
Excluding tax
Generator diode cut out. A-Ford

Generator diode cut out. A-Ford

Art.nr. H9392

Make your old cut-out solid state by installing this diode. Can be installed in your old cut-out if it is bad. Complete with instructions. Positive ground only

€ 6,16
Excluding tax
Generator trough bolt

Generator trough bolt

Art.nr. H9799

Lenght 15 cm. (6 inch)A-Ford 1928-31A-10166

€ 2,27
Excluding tax
Generator ground lead. A-Ford

Generator ground lead. A-Ford

Art.nr. H9807

1928-31A-10108

€ 2,02
Excluding tax
Generator Terminal cable. A-Ford

Generator Terminal cable. A-Ford

Art.nr. H9800

You'll need to solder the wire end of this wire to the head of the bolt that goes through the casing to the Cut-out OEM: A-10102 B

€ 4,12
Excluding tax
Generator terminal bolt. A-Ford

Generator terminal bolt. A-Ford

Art.nr. H9801

A-Ford 1928-31A-10101-B

€ 1,24
Excluding tax
Cut Out to Terminal Wire. A-Ford

Cut Out to Terminal Wire. A-Ford

Art.nr. A14406A

This fabric covered wire was used from Feb. of 1930 through the end of production, however it will work on all years 1928-31. This harness has the flexible black loom instead of the steel conduit that was used up to this point A-Ford:  A-1440...

€ 28,06
Excluding tax
Cut Out to Terminal Wire. A-Ford

Cut Out to Terminal Wire. A-Ford

Art.nr. 14406

This fabric covered wire was used from Feb. of 1930 through the end of production, however it will work on all years 1928-31. This harness has the flexible black loom instead of the steel conduit that was used up to this point A-Ford 1928-31 OEM:...

€ 24,75
Excluding tax
Generator post kit. A-Ford

Generator post kit. A-Ford

Art.nr. H9806

1928-31A-10103

€ 6,78
Excluding tax
Generator armature A-Ford

Generator armature A-Ford

Art.nr. H37666

All new so no core is required. This is for the early "long nose" style generator that had bearings on both ends of the armature A-Ford 1928-29 OEM: A-100005-AR

€ 133,88
Excluding tax
Generator armature. A-Ford

Generator armature. A-Ford

Art.nr. H9802

New armature, not rewound. Short nose version ( 1/2 inch nose) A-Ford 1930-31A-10005-BR

€ 138,84
Excluding tax
Generator band cover. A-Ford

Generator band cover. A-Ford

Art.nr. H9803

Covers the slotted holes on the A-Ford generatorA-10142-OR1928-31

€ 8,22
Excluding tax
Generator brush holder. A-Ford

Generator brush holder. A-Ford

Art.nr. H9804

A-Ford 1928-31A-10051C

€ 7,36
Excluding tax
Generator 3rd. brush holder

Generator 3rd. brush holder

Art.nr. H9808

A-Ford 1929-31A-10072

€ 8,47
Excluding tax
Generator brush kit A-Ford

Generator brush kit A-Ford

Art.nr. H9805

3 pc. brush kitA-Ford 1928-31A-10043

€ 5,25
Excluding tax
Wick and spring, Generator A-Ford

Wick and spring, Generator A-Ford

Art.nr. H9798

1930-31A-10145

€ 6,07
Excluding tax
Generator bearing felt. A-Ford

Generator bearing felt. A-Ford

Art.nr. H9809

A-Ford 1928-31A-10160Priced each

€ 1,57
Excluding tax
Generator bearing washer. A-Ford

Generator bearing washer. A-Ford

Art.nr. H9810

Flat washer that goes between the bearing and the felt washerFord 1928-31A-10114

€ 3,26
Excluding tax
Generator Rebuild Kit A-Ford

Generator Rebuild Kit A-Ford

Art.nr. H11105

Comes complete except for armature & field coil. Instructions included.

€ 78,47
Excluding tax
Generator fields, A-Ford

Generator fields, A-Ford

Art.nr. H7554

A-Ford 1928-316 Volt

€ 70,83
Excluding tax
A Ford Generator Field Coils - 12 Volt

A Ford Generator Field Coils - 12 Volt

Art.nr. H10951

Improve your weak generator with these good quality reproductions. 2 Pieces per Set.12 Volt systems only

€ 69,83
Excluding tax
Cut out, generator. A & T Ford

Cut out, generator. A & T Ford

Art.nr. H7796

Standard Cut out control6 Volt system onlyPositive earth ground

€ 34,30
Excluding tax
Electronic generator cut out. T & A Ford

Electronic generator cut out. T & A Ford

Art.nr. H7795

This semiconductor (state of the art) unit modernizes and replaces the original relay type of past years. It is identical to original exterior appearance and dimensions and is plated in cadmium as original. Also includes authentic insulators and hard...

€ 73,97
Excluding tax
6 Volt Alternator. A-Ford

6 Volt Alternator. A-Ford

Art.nr. H12810

6 Volt 35 Amp Unit - used on all Models A's using Halogen lights, etc. All new Alternator - not rebuilt. This is a bolt on one wire unit. Bracket and Pulley is included. Greatly increased cooling due to ducted fan and housing, also looks more lik...

€ 288,43
Excluding tax
12 Volt Alternator. A-Ford

12 Volt Alternator. A-Ford

Art.nr. H12811

12 Volt / 60 Amp Unit - used on all Models A's for most purposes. All new Alternator - not rebuilt. Increased cooling. This is a bolt on one wire unit. Bracket and Pulley is included. Greatly due to ducted fan and housing, also looks more like th...

€ 264,46
Excluding tax
Wisselstroom dynamo 12 Volt 63 Amp.

Wisselstroom dynamo 12 Volt 63 Amp.

Art.nr. H28785

Nieuwe 12 Volt enkel draads aansluiting wisselspannings dynamo. Deze dynamo schakelt zichzelf in bij een toerental  vanaf 800-850 tpm.  1 stroom kabel aansluiting naar de dynamo is voldoende aan/uit schakeling is automatisch dus zonder ex...

€ 147,93
Excluding tax
Generator Tension Brace. A-Ford

Generator Tension Brace. A-Ford

Art.nr. A-10152

A very usefull accessory that holds the generator in place without relying strictly on the pivot bolt. Mounts using one of the existing front timing cover bolt holes. The radiused end rests against the outside of the generator or alternator. Mount...

€ 7,23
Excluding tax
Alternator mounting Bracket. A-Ford

Alternator mounting Bracket. A-Ford

Art.nr. H28841

Bracket used to mount the alternator in place of the generator. Adjusts with washers so you can shift the alternator forward or backward for belt alignment A-Ford 1928-31

€ 41,28
Excluding tax
Alternator Pulley A-Ford

Alternator Pulley A-Ford

Art.nr. H28840

A smaller diameter pulley turns the alternator 2.6 times the engine speed which allows the alternator to "turn on" quicker. Fits any Delco or Ford alternator with a .670 shaft size. "Genuine Nu-Rex." 2-1/4" O.D

€ 49,50
Excluding tax

Our brands:

menu
Nederlands English
Deutsch Français

Product added to your shoppingcart

Continue shopping Go to shoppingcart

Close