Ford used this link in later years, but it will do a nice job on the Model A. Rubber insert balls includedA18055

This is the ball that is part of the rear leaf spring perch that the shock link mounts to. Use this style when repairing perches that do not have a removable ball. Simply cut the old ball off, drill the perch to 9/16", press the new ball in and ...

Worn balls affect shocks. This was a separate piece from Feb. 1930. Located on the rear axle and connects to the shock arm. A-Ford 1930-31 OEM: A-4024

Set with 8 rubber bushings for the dogbone type shock link

Rubber seal needed for original tube-style links - Seals the link where the ball enters. Set of 8. ​OEM: A18058

Protective metal caps cover the H8783 seals. Set of 8 ​OEM: A18059

Very good quality forged shock armsA18052B

Very good quality forged shock armsA18047B

Mounts: Right rear or left ftont A duplicate of the original Model A shock. Shocks come filled with oil and ready to go! Fully adjustable like the originals. Original oil reservoir is used. Cover is plain no embossing OEM: A-18016-B

Shock for Right Front or Left Back A duplicate of the original Model A shock. Shocks come filled with oil and ready to go! Fully adjustable like the originals. Original oil reservoir is used. Cover is plain no embossing. OEM: A-18015-B  

Kit has all the seals needed to rebuild all 4 shocks. Includes info sheet.

Special shock fluid for the A-Ford1 bottle will do all 4 shocksOEM: M-1046

This is a complete shock package that will put modern cylinder style shocks on your Model A. The only extra holes you have to drill are the upper shock mounting holes in the rear cross member. The lower front mount clamps to the axle and does not req...

A-Ford Rear axle 1928-31 1 Ton Truck Front Axle. 1928-32 Set contains 2 shackle kits  OEM: A5630

Contains 2 sets Bushings must be reamed after they have been pressed into the perch and leaf spring OEM: A5304, A-5465-RE

The steel bushing that the spring shackle fits into. One in the perch, and the other in the leaf spring. One set will do both sides Reming before fitting. A-Ford 1928-31 OEM: A-3034

10 leaf spring with tapered ends for the front of model A's A-Ford 1928-31 OEM: A-5310-A

Center spring bolt for the front leaf spring.  Bolt has the correct square head and includes a square nut for securing. Draw all of the leaves together with this long bolt/nut and cut off excess threads.  A-Ford 1928-31 OEM: A5345-...

Center spring bolt for the rear leaf spring.  Bolt has the correct square head and includes a square nut for securing. Draw all of the leaves together with this long bolt/nut and cut off excess threads.  A-Ford 1928-31 OEM: A-...

An alternative to an expensive reamer. Drills your shackle bushings to proper bore. 1/2" shank A-Ford 1928-31

An ideal tool to remove and install bushings from rear axle, camshaft, rear and front spring, perch bushings

An old accessory that will make your Ford ride like a Lincoln by oiling the springs. Keeps the dirt out. Covers both the front and rear springs with felt oil strips.