An aluminum channel set with a rubber insert that goes under the garnish moldings. Rests against window glass on windows that roll up and down A-Ford Coupe 1928-29 A-Ford pick-up 1930-31 A-Ford Tudor 1928-31 voorste deur ramen  OEM: A-1900...

An aluminum channel with a rubber insert that goes under the garnish moldings. Rests against window glass on windows that roll up and down A-Ford Coupe 1930-31 OEM: A-190008-B  

Aluminum channel with rubber inserts that fit under the garnish moldings. The rubber rests against the window glass to maintain a seal as it goes up and down. '28-'31 Tudor Rear OEM: A-19008-C Supplies as a set (2 pc)

Complete set to do both front doors A-Ford  1928-29 Coupe/Tudor,  1930-31 Tudor,  1930-31 Pickup all necessary molded channels with clips attached, upper window sponge seals, ""T"" shaped anti rattle (when re...

Kit for both front doors of a model A-Ford fordor or 4 door car. OEM: A-45983-4D

Has a lip for Fordors and Cabriolets - 95cm. longA48138 A45989

Ford: 28 - mid '30 Closed Cab Pickups, 28-30 Coupes, 28-30 Tudor. This is the standard window riser. Mounts to a 3/8" square shank on regulator. Chrome, attaches with included set screw or optional pin mount pins not included OEM: A...

The deluxe closed cars used this scroll window riser - used on: 28-31 Fordors, March 1930 - 31 Coupe & Tudor, 1931 Standard Slant Windshield Fordor, June 30-31 CC Pickup, 1929 Cabriolets. Order the A46250P pins to secure the handle and A48139B Escutc...

The deluxe style window riser was used on: 30-31 Cabriolet, 1931 Slant Windshield Town Sedan, 1931 Slant Windshield Deluxe Fordor, 30-31 Victoria, 1931 A400. Order A46250P pins to secure the handle and the A48139C Escutcheon

A replacement style that can be used in place of the standard escutcheons. Used on the window cranks. Brushed chrome finish.  Outside diameter: Ø 46 mm Inside diameter: Ø 17 mm Max height: 16.5 mm Minimal height: 12 mm A-F...

This is the standard escutcheon which fits between the window riser handle and the upholstery. 1 5/8" diam. X 5/8" high. Used on: 1928 - Mid 1930 CC Pickup, 1928 - 1930 Coupe & Tudor ​OEM: A-48139-A

This is the fancy deluxe style escutcheon that goes between the upholstery and the window riser handle. A-Ford 1928-31 OEM: A-48139-B

Cone-shaped. Fits behind upholstery panel against escutcheons to keep everything tight ​OEM: A-48284

One set per handle. Spring is crimped onto the outside door handles under escutcheon. Not needed when purchasing new handles. Works best on original handles. 2 Piece set - contains 1 spring & 1 cup A-Ford 1928-31 OEM: A-702350-R

Pins for attaching the window crank handles to the window regulator. Also used for pinning the twist style door opening handle (B-702400) to the door latch mechanism Diameter: Ø 3.17 mm. Lenght: 16 mm A-Ford 1928-31 OEM: A-46250-P

T-Ford 1926-27A-Ford 1928-29

Used on the right side of the 1928-29 Coupes, and Tudor Sedan. Chrome plated, can be used on left, but not original. Comes with two keys OEM: A-702350-AL

Right Side Only - 1931 Cabriolet & Fordor Sedan & Town Sedan & 1930-31 Victoria

Fits model T 1924-27 with closed cabModel A, 1928-31Fits under the door lock handleSquare 4.7 mm. Lenght 75mm

1 x 5/16-24 threaded nut & l.w is used to hold lift-up style door handles on shaft.OEM: A702400SN

The standard design escutcheon for the door opener handle. Made just like the original. Used with standard style door openers A-Ford 1928-31 OEM; A-46270-AR

This authentic reproduction door handle was used on: 28-31 Coupes and Sport Coupes, 28-29 Special & Business Coupe, 28-31 Tudor Sedans, 30-31 CC Pickups. Order A46270AR Escutcheon and A702400SN Sleeve nut."

Chromed inside door handle for the Model A Roadsters, Roadster Pickups, and Phaetons. body's  Mounting screw included  A-Ford 1928-31 OEM: A-702400-C

1930-31 Cabriolet,  1931 Slant Windshield Town Sedan,  1931 Slant Windshield Deluxe Fordor,  1930-'31 Victoria,  1931 A400 OEM: A-702400-B

1928-31 Replaces A-46335 A6237 Lenght : 44 mm Diameter Ø 6.0mm

This square piece of rubber mounts in the door post, and the door check bumper bumps against this rubber instead of the post. 1 set does both sides. Note: Not correct for 1931 Slant Windshield body styles A-Ford 1928-31 OEM: A-702828-BU

Ford 1928-31Metal Arm with Rubber CushionsReplaces A-702828-S

Double Side Loop Door Check StrapMolded Rubber with Reinforcing Fibers Molded in the EndsReplaces: A-1652592Ford 1928-48

Molded Rubber with Reinforcing Fibers Molded in the EndsDouble Side Loop Door Check StrapFord 1928-48Replaces: A-162592-L7

Molded Rubber with Reinforcing Fibers Molded in the EndsDouble Side Loop Door Check StrapFord 1928-48Replaces # A-162592-L8