This fuel pump is not designed to be used exclusively on early engines. It can be used in conjunction with the original mechanical pump. However, it should be put on a toggle switch and only run when necessary. Fuel operating pressures for this pump ...

Electronic fuel pumps were never used originally but are required in some circumstances, mainly when later downdraft carburetors are added. This is a quality 6-volt Carter brand pump rated at 4psi. (0.27 bar)  If you're using a carburet...

Universal 12 Volt inline fuel pump with low pressure. Designed for the early automobile. 5-8 LBS pressure  

Diaphram carburetor feed pumpFor use on carburetor engines onlyAutomatic stop system when float chamber is fullFuel hose: 8 mmPressure: 0.35 bar

Adjustable from 1 to  LB Psi. Fits 2x 1/4", 5/16", en 3/8" fuel lines

Inner diameter 9.5 mm Outside diameter: 9.5 mm Braided : NO Color: Black Pressure in bar: 10 Resistant: Lead free fuel Lenght/m 30 cm. ( added quantitys will be multiplied by 30 cm. For example ordering 3x qty. you will receive 90 cm fuel hos...

Inner diameter 4.5 mm Braided : Yes Color: Black Pressure in bar: 5 Resistant: Lead free fuel Lenght/m 30 cm. ( added quantitys will be multiplied by 30 cm. For example ordering 3x qty. you will receive 90 cm fuel hose in one lenght)

Inner diameter 6 mm Braided : Yes Color: Black Pressure in bar: 5 Resistant: Lead free fuel Lenght/m 30 cm. ( added quantitys will be multiplied by 30 cm. For example ordering 3x qty. you will receive 90 cm fuel hose in one lenght)

Inner diameter 7.5 mm Outside diameter: 13.5 mm Braided : NO Color: Black Pressure in bar: 10 Resistant: Lead free fuel Lenght/m 30 cm. ( added quantitys will be multiplied by 30 cm. For example ordering 3x qty. you will receive 90 cm fuel ho...

Inner diameter 7.5 mmBraided : YesColor: BlackPressure in bar: 5Resistant: Lead free fuelLenght/m 30 cm. ( added quantitys will be multiplied by 30 cm. For example ordering 3x qty. you will receive 90 cm fuel hose in one lenght)

Nut size 1/2" (12.5 mm)With oliveTube size 8 mmFits most lift pumps or sediment bowl

40 cm lenght With 1/2" nuts

52 cm lenght.with 1/2" nuts

56 cm lenghtwith 1/2" nuts

Contains: 20 x 5-7 mm. 20 x 7-9 mm. 20 x 9-11 mm. 20 x 11-13 mm. 20 x 13-15 mm. 20 x 14-17 mm. 20 x 15-18 mm. 20 x 17-20 mm.  

Contains:  15x 6mm. 15x 7mm. 15x 8mm. 15x 9mm. 15x 10mm.

Universal brass fuel tap Thread for tank: 1/4" Hose connection Ø 7.5 mm Total lenght: 80 mm

High quality brass fuel tap. 2 x 1/4" innner thread 

High quality brass fuel tap,  1 x 1/4" inner thread 1 x  1/4" Outer thread