Authentic in every detail right down to the hardware. This is the high quality brake light switch  Made in USA OEM; A-13480-BOR

Mounted on the transmission tower. A-Ford 1928-29 and early 1930 models A-13480-A

For the 1928-29 stop light switch. One end hooks to the stop light switch, the other to the special pin on the brake pedal A-Ford 1928-29 OEM: A-13507

A11558

This switch assembly will give you the authentic pop-out style switch appearance under the hood, but it uses the replacement style off-on switch

This is an replacement style ignition switch with keys for the original style pop-out switch. Not original but works very well OEM: A-11575-SW A-Ford 1928-32

This is a very good quality off-on switch that has been modified to mount and look like the original pop out style switch. When installed, it looks just like the old pop out switch. Genuine Nu-Rex. Your instrument panel must have the cup crimped to t...

A11556

These double female connectors were used to connect one harness to another. Accepts the bullet style wire ends. Each set contains 6 connectors

A must have safety device for your ford. Installs easily on the starter switch using the same starter switch mounting holes.

When adding a safety fuse, you will need these two longer screws with the lock washers to mount it A-Ford 1928-31

Complete wiring kit with battery cables One Bulb headlight with Cowl Light Kit Detailed wiring diagram included

Complete wiring kit with battery cablesOne Bulb headlightwith Cowl Light KitDetailed wiring diagram included

This Ford Model A lighting wire harness is made for one or two bulb headlights. If you have a two bulb headlight and want to use cowl lights - just add the cowl light wire to parking light terminal. The one bulb harness has the cowl light wire in it ...

This Ford Model A lighting wire harness is made for one or two bulb headlights. If you have a two bulb headlight and want to use cowl lights - just add the cowl light wire to parking light terminal. The one bulb harness has the cowl light wire in it....

A-Ford 1928-29A-13308-B

A-Ford 1928-31

Exact reproduction tail light for teh Ford. Now with a 21/5W bulb holderWith licence plate light

Exact reproduction of the original tail light. But now with 21/5W bulb fitting

Rear light with black powdercoated black body and stainless steel cover, Lens is made of real glass, just like the old days. Outside diameter: 10cm. Thickness 5.5 cm With mounting bolts , No licence plate light

Rear light with black powdercoated black body and stainless steel cover, Lens is made of real glass, just like the old days. Outside diameter. Ø 10cm. Thickness 5.5 cm With mounting bolts , With licence plate light

Rear light with black stainless steal housing. Lense is made of real glass just like in the old days. Outside diameter. 10cm. Thickness 5.5 cm With mounting bolts ,

Commercial vehicles used a lamp with a black painted housing. These lamps have black powder coated housing with a polished stainless rim

Real glass, with STOP written in the glass. To be used for tail light - brake indication

Tail Light glass only for model A Ford lightsFits to AL1030, H12884, AL1031 tail lightsMade of glassColor: Amber with red

Set with 6 stainless steel bolts attaches tail lamp to bracket, rim to bucket and license lens to bucket

Polished stainless steel tail light rim Fits the original style glass tail lamp lenses A-Ford 1928-31 OEM: A-13448-SS

Ford 1928-29 drum tail light license bracket. Steel mint reproduction. The license bracket on the drum tail lamp is incorporated into the back housing of the lamp that the components are built off of