Clip that holds the headlight rim in place Polished Stainless steel A-Ford 1928-31 OEM: A-13059
This is the small clip that sticks out the bottom of the bucket that the "T" bar hooks onto to hold the rim on. A-Ford 1928-31 OEM: A-13047
Repair two damaged rim latches with this all-chrome Kit. Instructions included.
15 mm
ba15D
A-Ford 1928-31 Ford V8 1932-39 OEM:A11654B, A11655/67
Mounts on bottom of steering column. The light wire harness slips inside this unit to turn lights off and on. This is not the poor functioning import unit, this is a quality American made switch assembly made to the archive blueprints A-Ford ...
Goes on end of light switch rod that fits into switch bodFord 1928-38
Small U shaped retainer that holds the spider on the rod A-Ford 1928-31 OEM: A-3644
This is the spring that holds tension against the spider to hold the light switch rod in place A-Ford 1928-31 OEM: A-3642
This is a non returnable product - READ INSTRUCTIONS CAREFULLY. Designed for low amperage loads - 4 Amp maximum and 2 Amp minimum loadVoltage reducer with resistance wire mounted on a ceramic back plateMounts under dash or motor compartment.Caution: ...
If you are needing to rebuild your horn, this kit will do the trick. Includes: Diaphram, screen, bracket, gaskets, brushes, springs, adjusting cover and flange bolts and nuts
The screen that fits into the end of the horn bell. Keeps out the bugs and dirt. Diameter: Ø 70 mm A-Ford 1928-31 OEM: A-13840
A brand new horn complete with the mounting bracket and the horn plate. Comes already painted with black powder coat paint OEM: A-13802-R6 A-Ford 1928-31
A brand new horn complete with the mounting bracket and the horn plate. Comes already painted with black powder coat paint
Antique car Horn Assembly - 12 Volt - Painted Black With Universal Mounting Bracket - Not Authentic to a Model A ford
Identificaton plate mounts on top of the Sparton horn housing. A-Ford 1928-31 OEM: A-13802
Buffed stainless steel cover. Designed to use your remote switch. Includes stainless arm & blade. Wiper blade lenght: 21 cm.Wiper arm lenght: 19.5 cm.Shaft wiper motor to end of wiper blade: 30 cm when mountedMotor has automatic stop
electric wiper kit that is a direct replacement for the old electric or vacuum wiper motor that mounted to the outside of the closed car windshield frame. The windshield can still be opened (about 2-1/2 to 3 inches) for fresh air. Motor will accommod...
Quickly Mounts to Under Dash Flange On Most Cars & TrucksHeavy Duty Toggle Switch With Chrome HandleUse for Fog Lights, Wiper Motors or Any Universal UseOn-Off-On SwitchUse For 12V Or 6V Systems
A14560P
Set with 4 bolts and washers to mount the terminal box against the firewall A-Ford 1928-31 OEM: A-14560-MB
Ford started out using this flat copper ground strap
This special headed bolt was used to attach the ground strap to the cross member of the frame A-Ford 1928 till March 1930OEM: A-14301-BT
Correctly braided and colored fabric cable that runs from the battery to the starter. 19" LongOEM: A14300F
35 qmm. wire, 16 inch Long w/ eyes on Each end. 1 on disconnect switch, 1 on starter switch for a A-FordBut also work for other brands or applications
2 x M10 connection cable19 mm dashboard mounting hole
This bracket uses the lower starter mount bolt for mounting. Provides a perfect mount for the disconnect switch between the frame and the starter.
Fits to the H7251 master switchØ 60 mm ODØ 20 mm ID