This passes through the windshield frame for ON/OFF functions.A-Ford 1928-31OEM: A17534A

Model A Ford Vacuum Windshield Wiper Arm - Stainless Steel - Replacement Style - Motor Mounted InsideAlso Fits 1932-1936 Passenger and 1932 & 1935-1936 Commercial ModelsOverall length is 7-3/4".

This authentic style wiper arm was used on the 1930-31 Deluxe Open Cars and the 68B Cabriolet. Chrome with Trico embossing on clip Lenght: 17 cm A-Ford 1930-31

For the Model A's that had the wiper motor mounted outside the car A-Ford 1928-31 OEM: A-17529 Wiper blade used: H10676 of H10677

7 1/2" arm extends to 11 1/2" ( 19 up to 29 cm) Hook and saddle style Made to clamp down on a shaft that is.235" (Ø 6 mm) in diameter.  

Lenght of blade: 19 cm. A-Ford 1928-31 Ford V8 1932-1940 Vervangt: A17528 A7036

Lengte blad 21 cm.A-Ford 1930-31Ford 1928-40Vervangt: A17528B, A7037-1

A-Ford 1928-2973.5 cm longA9700B

The valve assembly that mounts in the firewall to control the heat coming in from the manifold heater H9382

Not original but a great accessory item. Polished stainless plate that screws to the floorboards to hold your gearshift boot in place. Includes screws. 1928-31

If you need a smoother running engine with less vibration - this is what you need. It mounts to the crossmember on two rubber mounts. Two holes are needed to be drilled on the crossmember - ideal if front crossmember center hole is worn out. It saves...

This auxiliary spring is frequently missing. It holds the 2 small coil springs in place on the front motor mount

2 long and 1 short

Brass bushing fits into cross member from underside as part of motor mount supportModel A, 1928-31OEM: A-6034

This heater bolts onto the stock manifold with no cutting or welding. Complete with firewall valve to control the heat. Easily removed for summer driving

7 Piece Set includes - auxiliary spring, 3 coil springs, washer, castle nut, and cotter pin

Fits 1930-31 open cars,the only glass cut to the original specifications, with beveled edges. Sold in pairs only Size: 32.5 x 20.5 cm OEM: A-18252-CD

Chrome plated clamps for the wind wing glass. Comes with glass patterns. Price is for a kit, that is enough for both sides of the car

A-Ford April 1930 - 31Returns gas pedal to idle position, Mounts on accelerator shaft and bracketA9737

This is the straight cylindrical spring used from 1928 to early 1930

A35244Nail included

A9765P

A11471P

A-Ford 1928 tot Aug 1930

2 Piece steel, holds felt in place around pedals and steering column to keep air and fumes out.