Ø 60 mm gauge. with M10 x 1.5 tread. Capillary lead 1.80 mtr Sensor Ø 5 mm x 31mm For aircooled engines Fits to Guldner G-serie Fahr, Porsche etc.

Air cooled engine temperature gauge Diameter: Ø 60mm Mechanical operated Capillary: 1.8 meter. Feeler gauge: M10 x 1.25 Pin Ø 5  m x 31 mm  

nneapolis Moline temp gauge

Allis Chalmers B, C, CA, IB, RC, WC, WD, WD45, WF; D270, D272Replaces: 70213675, 213675

Fits into a 2" (52 mm) diameter hole 72" (1.80 mtr.) long heavy duty capillary tube included (check length before ordering.) Measures from 100 degrees to 220 degrees Stainless steel step bezel 5/8" - 18 UF thread wit...

1.80 mtr, wire lenght Connection to engine: nut size M10 x 1.5 mm

Old style temperature gauge. 52 mm outer diameter. 5/8" thread. , Will fit most thermostat housings or engine blocks 30 to 100 degree celcius.Fits also Ferguson TEA, TED, TEFFord 2N, 8N, 9N.

60mm diameter, capilary with M10 x 1.5 mm, For use in aircooled engines

60mm mounting hole. electrical use

Fits all temperature gauges with 5/8 " end. makes a water tight fit to the engine with 1/2" tread.

Adapter for temperature gauge M14 - M10 x 1

M16 x 1.5 to M10x1

5/8" UNC outer tread and M10x1 inner tread.

With this adapter you will make a easy temperature gauge connection ikn the coolant hoseDrill a 14mm hole in the excisting waterhose and connect this adapter. The adapter has an M10x1 inner thread

5/8" UNF Massey Ferguson 100 Series: 133, 145, 148, 152, 158, 168 200 Series: 230, 240, 245, 250, 265, 275, 285, 290, 298 2600 & 2700 Series: 2620, 2640, 2645, 2675, 2680, 2685, 2720, 2725 300 Series: 350, 352, 362, 365, 3...

M14x 1.5 tread, fits most electrical gauges

Every Temp- oil- amp or other gauge with a diamameter of 52 mm will with this on dash or under dash mounting bracket

Every Temp- oil- amp or other gauge with a diamameter of 52 mm will with this on dash or under dash mounting bracket