Testresult bij 4 indicating LED's Will test the following brake fluids:, DOT3, DOT4, DOT5.1 Not for DOT5. Diameter ca. 20 mm Works on 3 x  AAA battery's (included)

2pcs 165mm + 2pcs 240mm Set includes:(2) Contoured Tip and (2) Spoon Tip Lengths: 5-1/2 and 8-1/2 in Allows for easy removal of seals and o-rings without damaging the seal or the finished surface Material: carbon steel, heated, 48HRC, CRV Stee...

Lenght: 220 mm.  

SlagtrekkersetProfessionele slagtrekker voor in- en uitwendig trekken met 2 of 3 haken,te gebruiken als steekastrekker, wielnaaftrekker, remtrommeltrekker en plaatwerktrekker.Inhoud:- 3 sets haken- 2 flenzen- Schroefspindel/schuifhamer- Trekhaak- Top...

14pc. Bearing puller kit

16 pc puller kit. To remove bearings etc from blind holes

1/2" square

Pump for bleeding brake systems, measuring Turbo pressure etc.63.5 mm dial, Pressure/vacuum gaugeVacuum 0 to -1 barPressure: 0 to 3 bar

Key sizes: 1/4", 5/16", 3/8" 7/16", 1/2", 9/16" 5/8" 11/16".High quality set

16 pc set in high quality materialMaten: 1/4, 5/16, 3/8, 7/16, 1/2,9/16, 5/8, 11/16, 3/4, 13/16, 7/8,15/16, 1, 1.1/16, 1.1/8 en 1.1/4.

Good quality spanner set, High finish6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 en 20x22 mm.

Sockets 7/8", 15/16", 1", 1-1/16", 1-1/18", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-5/8", 1-3/4", 1-13/16", 1-7/8" en 2".

1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 en 3/8 inch.

Up to 150 mm Clear digital display.Gives digital measurements in milimeters and inchBettery included

5- pc kit with 2 handles and 3 forksFork sizes 17, 24 en 28 mm.

Fork opening: 15/16" (18 mm)Lenght: 30 cm

- Expander 54 - 89 mm.- Expander 38 - 64 mm.- Expander 28 - 44 mm.

Usable for single or double folding of copper tube and steel tubeTube sizes: : 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8".

Kit for punching holes in leather or gasket paperSizes: 3, 4, 5, 6 and 8 mm

Sizes: 1/32", 1/16" en 3/32". (1.6, 2.4 en 3.2 mm)

3 chisels of 10 (3/8"), 12 (1/2") en 16 (5/8") mm. High quality

Set1 x 1,5 mm1 x 3 mm1 x 4 mm1 x 5 mm1 x 6 mm1 x 8 mm

6,35 mm. (1/4") 6-hoekige schachten. HSS 3x 4,6,8,10,12mm. 4,6,8,10,12,14,16,18,20mm.4,6,8,10,12,14,16,18,20,22,24,26,28,30,32mm.

13 pc set.0.05 - 1.00 mm

13 Blade set in INCH thickness 0.002" up to  0.040"